Sunken and rutted block paving in Barrow-in-Furness: the local picture
In Barrow-in-Furness, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a sunken area repair cost in Barrow-in-Furness?
Guide price in Barrow-in-Furness: £300–£1,200 including VAT. These are North West guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Same blocks relaid, re-jointed and compacted
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Sub-base dug out and rebuilt where it has failed
- Blocks lifted, cleaned and stacked for re-use
Before we price your sunken area repair
- Condition and thickness of your existing blocks
- Whether a drain or gully is leaking under the paving
- How much of the area needs lifting to blend the repair
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Barrow-in-Furness: questions
Can you repair block paving in Barrow-in-Furness without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Kendal, Morecambe and Fleetwood?
Yes. We cover Barrow-in-Furness and the places around it, including Kendal, Morecambe and Fleetwood, and the rest of Cumbria.
Sunken paving near Barrow-in-Furness
Nearby towns we cover for sunken paving, and sunken paving across Cumbria:
