Planning a block paving cleaning job in Colne
Around Colne, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paving cleaning job cost in Colne?
For Colne, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rinse down of edges, steps and walls
- Rotary surface clean at a pressure that will not blow out the joints
- Optional biocide and sealer
- Pre-treatment where needed
Before we price your block paving cleaning job
- Moss, algae, weeds and oil staining
- Walls, doors and planting to protect
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Shade and drainage, which affect regrowth
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Cleaning in Colne: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving cleaning job cost in Colne?
Guide price for Colne: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Colne be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Colne
Nearby towns we cover for cleaning, and cleaning across Lancashire:
- Cleaning in Nelson, Lancashire
- Cleaning in Burnley
- Cleaning in Accrington
- Cleaning in Rawtenstall
- Cleaning in Blackburn
- Cleaning in Darwen
