Block paving cleaning in Burnley: the local picture
Burnley has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paving cleaning job cost in Burnley?
In the North West, a block paving cleaning job usually costs £2.50–£5 per m² including VAT. For a 50 m² drive, that is roughly £125–£250. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Weeds and moss removed from the joints
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Optional biocide and sealer
- Rinse down of edges, steps and walls
Before we price your block paving cleaning job
- Whether any blocks are loose or sunken first
- Moss, algae, weeds and oil staining
- Type of block and its age
- Walls, doors and planting to protect
- Shade and drainage, which affect regrowth
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Cleaning in Burnley: questions
How often should block paving in Burnley be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving cleaning job cost in Burnley?
Guide price for Burnley: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Cleaning near Burnley
Nearby towns we cover for cleaning, and cleaning across Lancashire:
- Cleaning in Nelson, Lancashire
- Cleaning in Colne
- Cleaning in Accrington
- Cleaning in Rawtenstall
- Cleaning in Blackburn
- Cleaning in Darwen
