Lancashire · Sealing

Block paving sealing in Colne

Tired block paving in Colne rarely needs replacing. A deep clean, fresh jointing sand and, if you want it, a sealer, make most drives look years younger.

  • Postcodes BB8, BB18
  • £5–£15 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Colne: what to expect

Colne is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a block paving sealing job cost in Colne?

Guide price in Colne£5–£15 per m²Including VAT at 20%

For Colne, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Sealing only£5–£15 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sealing service

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Drying time and a date when cars can return
  • Edges, walls and doors protected
  • Sealer applied evenly by roller or low-pressure sprayer
  • Second coat where the product requires it
  • Check that the paving is clean, re-sanded and dry

How we find the cause

  • How much joint sand is left
  • Which sealer finish suits a slope or patio
  • Whether any blocks are loose or sunken first
  • Type of block and its age
  • Walls, doors and planting to protect

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Sealing in Colne: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Nelson, Lancashire, Burnley and Accrington?

Yes. We cover Colne and the places around it, including Nelson, Lancashire, Burnley and Accrington, and the rest of Lancashire.

How often should block paving in Colne be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving sealing job cost in Colne?

Guide price for Colne: £5–£15 per m² including VAT, with a minimum charge for small areas.

Sealing near Colne

Nearby towns we cover for sealing, and sealing across Lancashire:

Other block paving services in Colne

Or see all block paving services in Colne.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Colne.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote