Northamptonshire · Sunken paving

Sunken and rutted block paving in Rushden

Sunken and rutted block paving in Rushden: most dips and loose blocks are a base or edging problem, not a block problem, so that is what we fix.

  • Postcodes NN10, NN9
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

Sunken and rutted block paving in Rushden: what to expect

Rushden is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

How much does a sunken area repair cost in Rushden?

Guide price in Rushden£300–£1,200Including VAT at 20%

Most sunken area repair quotes in the East Midlands fall within £300–£1,200 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sunken paving service

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

  • New laying course screeded to the correct level and falls
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Same blocks relaid, re-jointed and compacted
  • Blocks lifted, cleaned and stacked for re-use
  • Sub-base dug out and rebuilt where it has failed

What we look at first in Rushden

  • Falls, so water does not collect again
  • Condition and thickness of your existing blocks
  • Whether a drain or gully is leaking under the paving
  • How much of the area needs lifting to blend the repair
  • Whether the edging has moved or was never set in concrete

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Sunken paving in Rushden: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a sunken area repair cost in Rushden?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Can you repair block paving in Rushden without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Sunken paving near Rushden

Nearby towns we cover for sunken paving, and sunken paving across Northamptonshire:

Other block paving services in Rushden

Or see all block paving services in Rushden.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Rushden, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote