Northamptonshire · Lift and re-lay

Lift and re-lay block paving in Rushden

Lift and re-lay block paving in Rushden: most dips and loose blocks are a base or edging problem, not a block problem, so that is what we fix.

  • Postcodes NN10, NN9
  • £35–£80 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Planning a lift and re-lay job in Rushden

Rushden is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

How much does a lift and re-lay job cost in Rushden?

Guide price in Rushden£35–£80 per m²Including VAT at 20%

Most lift and re-lay job quotes in the East Midlands fall within £35–£80 per m² including VAT. 30 m² re-laid would usually be about £1,050–£2,400, with any extras listed separately on your quote.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a lift and re-lay job involve?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Jointing sand and compaction
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed
  • Blocks relaid, new cuts made, edges re-set
  • Lifting, cleaning and stacking

Before we price your lift and re-lay job

  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving
  • What caused the dip or movement: base, laying course, edging or drains
  • Falls, so water does not collect again
  • Trees, roots and past trenches

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Lift and re-lay in Rushden: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Can you repair block paving in Rushden without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

How much does a lift and re-lay job cost in Rushden?

Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Rushden

Nearby towns we cover for lift and re-lay, and lift and re-lay across Northamptonshire:

Other block paving services in Rushden

Or see all block paving services in Rushden.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Rushden.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote