Planning a sunken area repair in Corby
Homes in Corby include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a sunken area repair cost in Corby?
Guide price in Corby: £300–£1,200 including VAT. These are East Midlands guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Investigation of the cause (drain, sub-base, laying course, edging)
- Blocks lifted, cleaned and stacked for re-use
- New laying course screeded to the correct level and falls
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
What we look at first in Corby
- How much of the area needs lifting to blend the repair
- Replacement blocks or hidden blocks to swap in
- Falls, so water does not collect again
- What caused the dip or movement: base, laying course, edging or drains
- Whether the edging has moved or was never set in concrete
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sunken paving in Corby: questions
Can you repair block paving in Corby without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Kettering, Market Harborough and Wellingborough?
Yes. We cover Corby and the places around it, including Kettering, Market Harborough and Wellingborough, and the rest of Northamptonshire.
Sunken paving near Corby
Nearby towns we cover for sunken paving, and sunken paving across Northamptonshire:
- Sunken paving in Kettering
- Sunken paving in Market Harborough
- Sunken paving in Wellingborough
- Sunken paving in Rushden
- Sunken paving in Northampton
