Planning a block paving cleaning job in Corby
Corby is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a block paving cleaning job cost in Corby?
Guide price in Corby: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £125–£250. These are East Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Weeds and moss removed from the joints
- Rotary surface clean at a pressure that will not blow out the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
- Optional biocide and sealer
- Pre-treatment where needed
Before we price your block paving cleaning job
- Shade and drainage, which affect regrowth
- Type of block and its age
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Cleaning in Corby: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Kettering, Market Harborough and Wellingborough?
Yes. We cover Corby and the places around it, including Kettering, Market Harborough and Wellingborough, and the rest of Northamptonshire.
How much does a block paving cleaning job cost in Corby?
Guide price for Corby: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Cleaning near Corby
Nearby towns we cover for cleaning, and cleaning across Northamptonshire:
- Cleaning in Kettering
- Cleaning in Market Harborough
- Cleaning in Wellingborough
- Cleaning in Rushden
- Cleaning in Northampton
