Sunken and rutted block paving in Birkenhead: the local picture
Birkenhead has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a sunken area repair cost in Birkenhead?
Most sunken area repair quotes in the North West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
How we find the cause
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
- Falls, so water does not collect again
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Birkenhead: questions
Do you cover Liverpool, Wallasey and Bebington?
Yes. We cover Birkenhead and the places around it, including Liverpool, Wallasey and Bebington, and the rest of Merseyside.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Birkenhead without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Sunken paving near Birkenhead
Nearby towns we cover for sunken paving, and sunken paving across Merseyside:
- Sunken paving in Liverpool
- Sunken paving in Wallasey
- Sunken paving in Bebington
- Sunken paving in Bootle
- Sunken paving in Heswall
- Sunken paving in Garston
