England · Sunken paving

Sunken and rutted block paving in Merseyside

We repair block paving across Merseyside (CH41, CH42, CH43, CH44). Send photos for a first view, and we will tell you whether it is a quick fix or a base problem.

  • 17 towns listed
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

How much does a sunken area repair cost in Merseyside?

Guide price in Merseyside£300–£1,200Including VAT at 20%

In the North West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the North West, checked 9 November 2026.

Towns we cover in Merseyside

Choose a town for local prices and details for sunken paving:

What is included?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.

  • Blocks lifted, cleaned and stacked for re-use
  • Sub-base dug out and rebuilt where it has failed
  • Same blocks relaid, re-jointed and compacted
  • New laying course screeded to the correct level and falls
  • Investigation of the cause (drain, sub-base, laying course, edging)

How we find the cause

  • What caused the dip or movement: base, laying course, edging or drains
  • Falls, so water does not collect again
  • Whether a drain or gully is leaking under the paving
  • Trees, roots and past trenches
  • Replacement blocks or hidden blocks to swap in

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Sunken paving in Merseyside: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a sunken area repair cost in Merseyside?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Can you repair block paving in Merseyside without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote