England · Sunken paving

Sunken and rutted block paving in Bristol

If your drive or patio in Bristol has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Whole city covered
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

How much does a sunken area repair cost in Bristol?

Guide price in Bristol£300–£1,200Including VAT at 20%

Most sunken area repair quotes in the South West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the South West, checked 9 November 2026.

Sunken paving in Bristol and nearby

We cover the whole of Bristol (BS1, BS2, BS3, BS4, BS5, BS6 and the rest of the BS postcodes), plus nearby towns:

What does a sunken area repair involve?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

  • New laying course screeded to the correct level and falls
  • Same blocks relaid, re-jointed and compacted
  • Sub-base dug out and rebuilt where it has failed
  • Blocks lifted, cleaned and stacked for re-use
  • Investigation of the cause (drain, sub-base, laying course, edging)

How we find the cause

  • Falls, so water does not collect again
  • Whether the edging has moved or was never set in concrete
  • Whether a drain or gully is leaking under the paving
  • How much of the area needs lifting to blend the repair
  • Condition and thickness of your existing blocks

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Sunken paving in Bristol: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you repair block paving in Bristol without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Do you cover Kingswood, Mangotsfield and Nailsea?

Yes. We cover all of Bristol, including Kingswood, Mangotsfield and Nailsea.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote