What to know before a replacement block drive in Coatbridge
Coatbridge is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a replacement block drive cost in Coatbridge?
Guide price in Coatbridge: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
Before we price your replacement block drive
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Edges against lawns, beds, walls and neighbours
- Trees and roots near the drive
- Steps, thresholds and door heights
Rules for front drives in Coatbridge
Coatbridge is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Replace an old drive in Coatbridge: questions
Is the survey in Coatbridge free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a replacement block drive cost in Coatbridge?
Our guide for Coatbridge is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Coatbridge?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Replace an old drive near Coatbridge
Nearby towns we cover for replace an old drive, and replace an old drive across Lanarkshire:
- Replace an old drive in Airdrie
- Replace an old drive in Bellshill
- Replace an old drive in Motherwell
- Replace an old drive in Blantyre
- Replace an old drive in Cumbernauld
- Replace an old drive in Cambuslang
