What to know before a replacement block drive in Ross-on-Wye
Around Ross-on-Wye, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
How much does a replacement block drive cost in Ross-on-Wye?
Guide price in Ross-on-Wye: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are West Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
What we check on a Ross-on-Wye survey
- Ground conditions under the old surface and how deep the sub-base must be
- Block range, thickness, colour and pattern to suit the house
- Edges against lawns, beds, walls and neighbours
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
Rules for front drives in Ross-on-Wye
Ross-on-Wye is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Replace an old drive in Ross-on-Wye: questions
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a replacement block drive cost in Ross-on-Wye?
Our guide for Ross-on-Wye is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Is the survey in Ross-on-Wye free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do I need planning permission for a replacement block drive in Ross-on-Wye?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Replace an old drive near Ross-on-Wye
Nearby towns we cover for replace an old drive, and replace an old drive across Herefordshire:
