Planning a permeable block drive in Ross-on-Wye
Ross-on-Wye is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
How much does a permeable block drive cost in Ross-on-Wye?
For Ross-on-Wye, our guide is £105–£170 per m² including VAT, so a 50 m² drive is likely to be £5,250–£8,500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Deeper dig-out for the open-graded sub-base
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
- Grit laying course and permeable blocks with grit-filled joints
- Ground check: how well the soil drains and how high the water table sits
Before we price your permeable block drive
- Whether front-garden planning rules apply
- Edges against lawns, beds, walls and neighbours
- Existing manhole and inspection covers, and whether to recess them
- Trees and roots near the drive
- Block range, thickness, colour and pattern to suit the house
Planning and kerb rules in Ross-on-Wye
Ross-on-Wye is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Permeable paving in Ross-on-Wye: questions
Do you cover Ledbury, Hereford and Leominster?
Yes. We cover Ross-on-Wye and the places around it, including Ledbury, Hereford and Leominster, and the rest of Herefordshire.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Ross-on-Wye?
Our guide for Ross-on-Wye is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Permeable paving near Ross-on-Wye
Nearby towns we cover for permeable paving, and permeable paving across Herefordshire:
