Hampshire · Replace an old drive

Replacing tarmac or concrete with block paving in Bordon

From GU35, GU30, GU33, GU34 to the villages around Bordon, we quote replacement block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes GU35, GU30, GU33
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Bordon

Bordon is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a replacement block drive cost in Bordon?

Guide price in Bordon£105–£195 per m²Including VAT at 20%

Most replacement block drive quotes in the South East fall within £105–£195 per m² including VAT. A 45 m² replacement drive would usually be about £4,600–£8,750, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Assessment of the old base: keep, top up or replace
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Levels set below the damp-proof course with falls away from the house

What the survey covers

  • Edges against lawns, beds, walls and neighbours
  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • Steps, thresholds and door heights
  • Ground conditions under the old surface and how deep the sub-base must be

Rules for front drives in Bordon

Bordon is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Replace an old drive in Bordon: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

How much does a replacement block drive cost in Bordon?

Our guide for Bordon is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.

Is the survey in Bordon free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Aldershot, Fleet and Farnborough?

Yes. We cover Bordon and the places around it, including Aldershot, Fleet and Farnborough, and the rest of Hampshire.

Replace an old drive near Bordon

Nearby towns we cover for replace an old drive, and replace an old drive across Hampshire:

Other block paving services in Bordon

Or see all block paving services in Bordon.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Bordon, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote