Hampshire · Cleaning

Block paving cleaning in Bordon

We clean, re-sand and seal block paving across Bordon (GU35, GU30, GU33, GU34), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes GU35, GU30, GU33
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Bordon: what to expect

Bordon is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paving cleaning job cost in Bordon?

Guide price in Bordon£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Weeds and moss removed from the joints

How we find the cause

  • Walls, doors and planting to protect
  • How much joint sand is left
  • Which sealer finish suits a slope or patio
  • Type of block and its age
  • Shade and drainage, which affect regrowth

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Bordon: questions

How much does a block paving cleaning job cost in Bordon?

Guide price for Bordon: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How often should block paving in Bordon be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Cleaning near Bordon

Nearby towns we cover for cleaning, and cleaning across Hampshire:

Other block paving services in Bordon

Or see all block paving services in Bordon.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote