Replacing tarmac or concrete with block paving in Holyhead: the local picture
In and around Holyhead, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
Work in Holyhead is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a replacement block drive cost in Holyhead?
Expect replacement block drives in Holyhead to come in at around £90–£165 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,000 and £7,550.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
What the survey covers
- Block range, thickness, colour and pattern to suit the house
- Existing manhole and inspection covers, and whether to recess them
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
Do you need permission in Holyhead?
Holyhead is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Replace an old drive in Holyhead: questions
Do I need planning permission for a replacement block drive in Holyhead?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Is the survey in Holyhead free?
In Holyhead we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Holyhead
Nearby towns we cover for replace an old drive, and replace an old drive across Gwynedd:
