Planning a permeable block drive in Holyhead
In and around Holyhead, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
Work in Holyhead is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a permeable block drive cost in Holyhead?
Most permeable block drive quotes in Wales fall within £100–£160 per m² including VAT. A 50 m² drive would usually be about £4,900–£7,900, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £100–£160 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
Before we price your permeable block drive
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Access for a mini-digger, skip or grab lorry
Planning and kerb rules in Holyhead
Holyhead is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Permeable paving in Holyhead: questions
Do I need planning permission for a permeable block drive in Holyhead?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a permeable block drive cost in Holyhead?
Our guide for Holyhead is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Holyhead
Nearby towns we cover for permeable paving, and permeable paving across Gwynedd:
