Planning a replacement block drive in Pontypool
In Pontypool, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a replacement block drive cost in Pontypool?
In Wales, a replacement block drive usually costs £90–£165 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,000–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
What the survey covers
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
- The kerb: is it already dropped, and is it wide enough?
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
Do you need permission in Pontypool?
Pontypool is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Pontypool: questions
How much does a replacement block drive cost in Pontypool?
Our guide for Pontypool is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.
Do you cover Cwmbran, Abertillery and Abercarn?
Yes. We cover Pontypool and the places around it, including Cwmbran, Abertillery and Abercarn, and the rest of Gwent.
Do I need planning permission for a replacement block drive in Pontypool?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Pontypool?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Pontypool
Nearby towns we cover for replace an old drive, and replace an old drive across Gwent:
- Replace an old drive in Cwmbran
- Replace an old drive in Abertillery
- Replace an old drive in Abercarn
- Replace an old drive in Risca
- Replace an old drive in Blackwood
- Replace an old drive in Newport, Gwent
