Gwent · Cleaning

Block paving cleaning in Pontypool

We clean, re-sand and seal block paving across Pontypool (NP4, NP15), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes NP4, NP15
  • £2.50–£4.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Pontypool

In Pontypool, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a block paving cleaning job cost in Pontypool?

Guide price in Pontypool£2.50–£4.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in Wales fall within £2.50–£4.50 per m² including VAT. A 50 m² drive would usually be about £115–£235, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£4.50–£14 per m²

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Pre-treatment where needed
  • Optional biocide and sealer
  • Rotary surface clean at a pressure that will not blow out the joints
  • Rinse down of edges, steps and walls
  • Kiln-dried sand brushed in once dry (re-sanding package)

Before we price your block paving cleaning job

  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining
  • Shade and drainage, which affect regrowth
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Cleaning in Pontypool: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Pontypool?

Guide price for Pontypool: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Cwmbran, Abertillery and Abercarn?

Yes. We cover Pontypool and the places around it, including Cwmbran, Abertillery and Abercarn, and the rest of Gwent.

Cleaning near Pontypool

Nearby towns we cover for cleaning, and cleaning across Gwent:

Other block paving services in Pontypool

Or see all block paving services in Pontypool.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote