Greater London · Replace an old drive

Replacing tarmac or concrete with block paving in Uxbridge

Our replacing tarmac or concrete with block paving service covers Uxbridge and nearby Ruislip, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes UB8, UB10
  • £115–£215 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Uxbridge

Uxbridge has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.

How much does a replacement block drive cost in Uxbridge?

Guide price in Uxbridge£115–£215 per m²Including VAT at 20%

Guide price in Uxbridge: £115–£215 per m² including VAT, which puts a 45 m² replacement drive at about £5,150–£9,700. These are London guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£115–£215 per m²
Breaking out an old surface£12–£50 per m²
Edging or kerb, bedded and haunched£25–£60 per metre
Typical channel drain run£420–£1,200
Dropped kerb (vehicle crossover) construction£1,200–£3,600

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • New edging, sub-base where needed, and the block drive
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house

Before we price your replacement block drive

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Block range, thickness, colour and pattern to suit the house
  • Whether front-garden planning rules apply
  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?

Do you need permission in Uxbridge?

Uxbridge is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Uxbridge: questions

Do you cover Ruislip, Hayes and Southall?

Yes. We cover Uxbridge and the places around it, including Ruislip, Hayes and Southall, and the rest of Greater London.

Can you match the blocks to my house in Uxbridge?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Uxbridge free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Replace an old drive near Uxbridge

Nearby towns we cover for replace an old drive, and replace an old drive across Greater London:

Other block paving services in Uxbridge

Or see all block paving services in Uxbridge.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote