Greater London · Replace an old drive

Replacing tarmac or concrete with block paving in Leytonstone

Block paving suits homes in Leytonstone because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes E11, E10, E18
  • £115–£215 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Leytonstone

Leytonstone is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.

How much does a replacement block drive cost in Leytonstone?

Guide price in Leytonstone£115–£215 per m²Including VAT at 20%

Guide price in Leytonstone: £115–£215 per m² including VAT, which puts a 45 m² replacement drive at about £5,150–£9,700. These are London guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£115–£215 per m²
Breaking out an old surface£12–£50 per m²
Edging or kerb, bedded and haunched£25–£60 per metre
Typical channel drain run£420–£1,200
Dropped kerb (vehicle crossover) construction£1,200–£3,600

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road

What we check on a Leytonstone survey

  • The kerb: is it already dropped, and is it wide enough?
  • Edges against lawns, beds, walls and neighbours
  • Existing manhole and inspection covers, and whether to recess them
  • Where an electric vehicle charger cable might run
  • Where rain will go: falls, lawn, border, channel or soakaway

Rules for front drives in Leytonstone

Leytonstone is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Replace an old drive in Leytonstone: questions

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Leytonstone free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Can you match the blocks to my house in Leytonstone?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Leytonstone

Nearby towns we cover for replace an old drive, and replace an old drive across Greater London:

Other block paving services in Leytonstone

Or see all block paving services in Leytonstone.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote