County Armagh · Replace an old drive

Replacing tarmac or concrete with block paving in Craigavon

Planning a replacement block drive in Craigavon? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes BT64, BT65, BT66
  • £90–£170 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Craigavon

Homes in Craigavon include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a replacement block drive cost in Craigavon?

Guide price in Craigavon£90–£170 per m²Including VAT at 20%

Most replacement block drive quotes in Northern Ireland fall within £90–£170 per m² including VAT. A 45 m² replacement drive would usually be about £4,050–£7,700, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£170 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road

What we check on a Craigavon survey

  • Ground conditions under the old surface and how deep the sub-base must be
  • Where rain will go: falls, lawn, border, channel or soakaway
  • The kerb: is it already dropped, and is it wide enough?
  • Block range, thickness, colour and pattern to suit the house
  • Where an electric vehicle charger cable might run

Do you need permission in Craigavon?

Craigavon is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Replace an old drive in Craigavon: questions

Can you match the blocks to my house in Craigavon?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Craigavon free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Portadown, Armagh and Banbridge?

Yes. We cover Craigavon and the places around it, including Portadown, Armagh and Banbridge, and the rest of County Armagh.

Replace an old drive near Craigavon

Nearby towns we cover for replace an old drive, and replace an old drive across County Armagh:

Other block paving services in Craigavon

Or see all block paving services in Craigavon.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Craigavon.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote