What to know before a replacement block drive in Prestatyn
Around Prestatyn, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a replacement block drive cost in Prestatyn?
For Prestatyn, our guide is £90–£165 per m² including VAT, so a 45 m² replacement drive is likely to be £4,000–£7,550. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Trees and roots near the drive
- Access for a mini-digger, skip or grab lorry
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
Planning and kerb rules in Prestatyn
Prestatyn is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Replace an old drive in Prestatyn: questions
Do you cover Rhyl, Abergele and Flint?
Yes. We cover Prestatyn and the places around it, including Rhyl, Abergele and Flint, and the rest of Clwyd.
Do I need planning permission for a replacement block drive in Prestatyn?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
How much does a replacement block drive cost in Prestatyn?
Our guide for Prestatyn is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.
Can you match the blocks to my house in Prestatyn?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Prestatyn
Nearby towns we cover for replace an old drive, and replace an old drive across Clwyd:
- Replace an old drive in Rhyl
- Replace an old drive in Abergele
- Replace an old drive in Flint
- Replace an old drive in Colwyn Bay
- Replace an old drive in Mold
- Replace an old drive in Deganwy
