Replacing tarmac or concrete with block paving in Deganwy: the local picture
Deganwy is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a replacement block drive cost in Deganwy?
In Wales, a replacement block drive usually costs £90–£165 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,000–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
Do you need permission in Deganwy?
Deganwy is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Replace an old drive in Deganwy: questions
Do you cover Llandudno, Colwyn Bay and Abergele?
Yes. We cover Deganwy and the places around it, including Llandudno, Colwyn Bay and Abergele, and the rest of Clwyd.
Is the survey in Deganwy free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Deganwy
Nearby towns we cover for replace an old drive, and replace an old drive across Clwyd:
- Replace an old drive in Llandudno
- Replace an old drive in Colwyn Bay
- Replace an old drive in Abergele
- Replace an old drive in Rhyl
- Replace an old drive in Prestatyn
