Buckinghamshire · Replace an old drive

Replacing tarmac or concrete with block paving in Amersham

Thinking about replacement block drives in Amersham? We survey, specify and build them for homeowners across Amersham and the surrounding HP postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes HP7, HP6, HP16
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Replacing tarmac or concrete with block paving in Amersham: the local picture

Amersham is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a replacement block drive cost in Amersham?

Guide price in Amersham£105–£195 per m²Including VAT at 20%

Most replacement block drive quotes in the South East fall within £105–£195 per m² including VAT. A 45 m² replacement drive would usually be about £4,600–£8,750, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace

What we check on an Amersham survey

  • Trees and roots near the drive
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Block range, thickness, colour and pattern to suit the house
  • Edges against lawns, beds, walls and neighbours

Planning and kerb rules in Amersham

Amersham is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Replace an old drive in Amersham: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a replacement block drive in Amersham?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Amersham free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Can you match the blocks to my house in Amersham?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Amersham

Nearby towns we cover for replace an old drive, and replace an old drive across Buckinghamshire:

Other block paving services in Amersham

Or see all block paving services in Amersham.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Amersham.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote