What to know before a permeable block drive in Renfrew
Around Renfrew, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a permeable block drive cost in Renfrew?
In Scotland, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
Before we price your permeable block drive
- Whether front-garden planning rules apply
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
Do you need permission in Renfrew?
Renfrew is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Permeable paving in Renfrew: questions
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Renfrew?
Our guide for Renfrew is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Is the survey in Renfrew free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Renfrew?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Permeable paving near Renfrew
Nearby towns we cover for permeable paving, and permeable paving across Renfrewshire and Inverclyde:
- Permeable paving in Erskine
- Permeable paving in Paisley
- Permeable paving in Barrhead
- Permeable paving in Johnstone
- Permeable paving in Giffnock
- Permeable paving in Newton Mearns
