Planning a block paving sealing job in Renfrew
Around Renfrew, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Renfrew?
For Renfrew, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
What we look at first in Renfrew
- Moss, algae, weeds and oil staining
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Renfrew: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Renfrew?
Guide price for Renfrew: £5–£15 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Renfrew be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Renfrew
Nearby towns we cover for sealing, and sealing across Renfrewshire and Inverclyde:
- Sealing in Erskine
- Sealing in Paisley
- Sealing in Barrhead
- Sealing in Johnstone
- Sealing in Giffnock
- Sealing in Newton Mearns
