Planning a permeable block drive in Morecambe
Homes in Morecambe include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a permeable block drive cost in Morecambe?
Guide price in Morecambe: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Deeper dig-out for the open-graded sub-base
- Edge restraints and any overflow or outlet the design needs
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
What the survey covers
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
- Existing manhole and inspection covers, and whether to recess them
- The kerb: is it already dropped, and is it wide enough?
Do you need permission in Morecambe?
Morecambe is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Permeable paving in Morecambe: questions
Do you cover Lancaster, Fleetwood and Thornton-Cleveleys?
Yes. We cover Morecambe and the places around it, including Lancaster, Fleetwood and Thornton-Cleveleys, and the rest of Lancashire.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Morecambe?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Morecambe
Nearby towns we cover for permeable paving, and permeable paving across Lancashire:
- Permeable paving in Lancaster
- Permeable paving in Fleetwood
- Permeable paving in Thornton-Cleveleys
- Permeable paving in Blackpool
- Permeable paving in Preston
- Permeable paving in Lytham St Annes
