Lanarkshire · Permeable paving

Permeable block paving in Bellshill

We quote permeable block drives throughout Bellshill and Lanarkshire. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes ML4
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

What to know before a permeable block drive in Bellshill

In and around Bellshill, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a permeable block drive cost in Bellshill?

Guide price in Bellshill£105–£170 per m²Including VAT at 20%

Expect permeable block drives in Bellshill to come in at around £105–£170 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £5,250 and £8,500.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Geotextile layer where the design needs one
  • Grit laying course and permeable blocks with grit-filled joints
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Ground check: how well the soil drains and how high the water table sits
  • Deeper dig-out for the open-graded sub-base

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • Ground conditions under the old surface and how deep the sub-base must be
  • The kerb: is it already dropped, and is it wide enough?
  • Block range, thickness, colour and pattern to suit the house
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Do you need permission in Bellshill?

Bellshill is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Permeable paving in Bellshill: questions

Is the survey in Bellshill free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Bellshill?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Bellshill

Nearby towns we cover for permeable paving, and permeable paving across Lanarkshire:

Other block paving services in Bellshill

Or see all block paving services in Bellshill.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Bellshill.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote