Planning a block paving sealing job in Bellshill
Around Bellshill, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Bellshill?
Most block paving sealing job quotes in Scotland fall within £5–£15 per m² including VAT. A 50 m² drive would usually be about £250–£750, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Second coat where the product requires it
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
Before we price your block paving sealing job
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Whether any blocks are loose or sunken first
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Bellshill: questions
How often should block paving in Bellshill be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Motherwell, Coatbridge and Blantyre?
Yes. We cover Bellshill and the places around it, including Motherwell, Coatbridge and Blantyre, and the rest of Lanarkshire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Bellshill
Nearby towns we cover for sealing, and sealing across Lanarkshire:
- Sealing in Motherwell
- Sealing in Coatbridge
- Sealing in Blantyre
- Sealing in Airdrie
- Sealing in Hamilton
- Sealing in Wishaw
