What to know before a permeable block drive in Nairn
Around Nairn, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
Work in the Highlands is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a permeable block drive cost in Nairn?
Most permeable block drive quotes in Scotland fall within £105–£170 per m² including VAT. A 50 m² drive would usually be about £5,250–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Geotextile layer where the design needs one
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
- Deeper dig-out for the open-graded sub-base
- Edge restraints and any overflow or outlet the design needs
Before we price your permeable block drive
- Steps, thresholds and door heights
- Where rain will go: falls, lawn, border, channel or soakaway
- Existing manhole and inspection covers, and whether to recess them
- Edges against lawns, beds, walls and neighbours
- Block range, thickness, colour and pattern to suit the house
Planning and kerb rules in Nairn
Nairn is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Permeable paving in Nairn: questions
Do you cover Inverness, Alness and Forres?
Yes. We cover Nairn and the places around it, including Inverness, Alness and Forres, and the rest of the Highlands.
Can you match the blocks to my house in Nairn?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a permeable block drive cost in Nairn?
Our guide for Nairn is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Permeable paving near Nairn
Nearby towns we cover for permeable paving, and permeable paving across Highlands:
