Hertfordshire · Permeable paving

Permeable block paving in Rickmansworth

We quote permeable block drives throughout Rickmansworth and Hertfordshire. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes WD3
  • £110–£180 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Rickmansworth

In Rickmansworth, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.

How much does a permeable block drive cost in Rickmansworth?

Guide price in Rickmansworth£110–£180 per m²Including VAT at 20%

Expect permeable block drives in Rickmansworth to come in at around £110–£180 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £5,500 and £8,950.

ItemGuide price inc VAT
Permeable block paving driveway£110–£180 per m²
Breaking out an old surface£11–£40 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£370–£1,050
Dropped kerb (vehicle crossover) construction£1,050–£3,150

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our permeable paving service

It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.

  • Edge restraints and any overflow or outlet the design needs
  • Deeper dig-out for the open-graded sub-base
  • Ground check: how well the soil drains and how high the water table sits
  • Grit laying course and permeable blocks with grit-filled joints
  • Open-graded crushed stone (no fines) laid and compacted in layers

What we check on a Rickmansworth survey

  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run
  • Ground conditions under the old surface and how deep the sub-base must be
  • Access for a mini-digger, skip or grab lorry
  • Block range, thickness, colour and pattern to suit the house

Rules for front drives in Rickmansworth

Rickmansworth is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Permeable paving in Rickmansworth: questions

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Watford, North Watford and Bushey?

Yes. We cover Rickmansworth and the places around it, including Watford, North Watford and Bushey, and the rest of Hertfordshire.

Can you match the blocks to my house in Rickmansworth?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Rickmansworth

Nearby towns we cover for permeable paving, and permeable paving across Hertfordshire:

Other block paving services in Rickmansworth

Or see all block paving services in Rickmansworth.

Next step

Get a guide price in two minutes

Ready to talk about your permeable block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote