What to know before a permeable block drive in Hemel Hempstead
Across Hemel Hempstead, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a permeable block drive cost in Hemel Hempstead?
In the East of England, a permeable block drive usually costs £110–£180 per m² including VAT. For a 50 m² drive, that is roughly £5,500–£8,950. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £110–£180 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Deeper dig-out for the open-graded sub-base
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Edge restraints and any overflow or outlet the design needs
Before we price your permeable block drive
- Existing manhole and inspection covers, and whether to recess them
- The kerb: is it already dropped, and is it wide enough?
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
- Steps, thresholds and door heights
Do you need permission in Hemel Hempstead?
Hemel Hempstead is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Permeable paving in Hemel Hempstead: questions
Can you match the blocks to my house in Hemel Hempstead?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Is the survey in Hemel Hempstead free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a permeable block drive in Hemel Hempstead?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Permeable paving near Hemel Hempstead
Nearby towns we cover for permeable paving, and permeable paving across Hertfordshire:
- Permeable paving in Berkhamsted
- Permeable paving in St Albans
- Permeable paving in North Watford
- Permeable paving in Harpenden
- Permeable paving in Watford
- Permeable paving in Rickmansworth
