Hampshire · Permeable paving

Permeable block paving in Winchester

We quote permeable block drives throughout Winchester and Hampshire. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes SO23, SO22, SO21
  • £115–£185 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Winchester: the local picture

In Winchester, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a permeable block drive cost in Winchester?

Guide price in Winchester£115–£185 per m²Including VAT at 20%

Most permeable block drive quotes in the South East fall within £115–£185 per m² including VAT. A 50 m² drive would usually be about £5,650–£9,200, with any extras listed separately on your quote.

ItemGuide price inc VAT
Permeable block paving driveway£115–£185 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.

  • Grit laying course and permeable blocks with grit-filled joints
  • Deeper dig-out for the open-graded sub-base
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Edge restraints and any overflow or outlet the design needs
  • Ground check: how well the soil drains and how high the water table sits

Before we price your permeable block drive

  • Existing manhole and inspection covers, and whether to recess them
  • Access for a mini-digger, skip or grab lorry
  • Ground conditions under the old surface and how deep the sub-base must be
  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run

Do you need permission in Winchester?

Winchester is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Permeable paving in Winchester: questions

How much does a permeable block drive cost in Winchester?

Our guide for Winchester is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.

Is the survey in Winchester free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Winchester?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Winchester

Nearby towns we cover for permeable paving, and permeable paving across Hampshire:

Other block paving services in Winchester

Or see all block paving services in Winchester.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote