What to know before a permeable block drive in Totton
In Totton, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a permeable block drive cost in Totton?
Guide price in Totton: £115–£185 per m² including VAT, which puts a 50 m² drive at about £5,650–£9,200. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £115–£185 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Geotextile layer where the design needs one
- Open-graded crushed stone (no fines) laid and compacted in layers
Before we price your permeable block drive
- Edges against lawns, beds, walls and neighbours
- Ground conditions under the old surface and how deep the sub-base must be
- Existing manhole and inspection covers, and whether to recess them
- Where rain will go: falls, lawn, border, channel or soakaway
- Trees and roots near the drive
Planning and kerb rules in Totton
Totton is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Permeable paving in Totton: questions
Do I need planning permission for a permeable block drive in Totton?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a permeable block drive cost in Totton?
Our guide for Totton is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.
Can you match the blocks to my house in Totton?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Southampton, Hythe and Eastleigh?
Yes. We cover Totton and the places around it, including Southampton, Hythe and Eastleigh, and the rest of Hampshire.
Permeable paving near Totton
Nearby towns we cover for permeable paving, and permeable paving across Hampshire:
- Permeable paving in Southampton
- Permeable paving in Hythe
- Permeable paving in Eastleigh
- Permeable paving in Winchester
- Permeable paving in New Milton
- Permeable paving in Fareham
