What to know before a permeable block drive in Brixton
Brixton has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a permeable block drive cost in Brixton?
Expect permeable block drives in Brixton to come in at around £125–£205 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £6,300 and £10,200.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £125–£205 per m² |
| Breaking out an old surface | £12–£50 per m² |
| Edging or kerb, bedded and haunched | £25–£60 per metre |
| Typical channel drain run | £420–£1,200 |
| Dropped kerb (vehicle crossover) construction | £1,200–£3,600 |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Deeper dig-out for the open-graded sub-base
- Edge restraints and any overflow or outlet the design needs
Before we price your permeable block drive
- Existing manhole and inspection covers, and whether to recess them
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- Edges against lawns, beds, walls and neighbours
- Where rain will go: falls, lawn, border, channel or soakaway
Rules for front drives in Brixton
Brixton is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Permeable paving in Brixton: questions
Do I need planning permission for a permeable block drive in Brixton?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a permeable block drive cost in Brixton?
Our guide for Brixton is £125–£205 per m² including VAT, so a 50 m² drive is usually about £6,300–£10,200. Your fixed price follows the survey.
Can you match the blocks to my house in Brixton?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Brixton
Nearby towns we cover for permeable paving, and permeable paving across Greater London:
- Permeable paving in Peckham
- Permeable paving in Battersea
- Permeable paving in Streatham
- Permeable paving in Catford
- Permeable paving in Fulham
- Permeable paving in Greenwich
