Planning a permeable block drive in Bishopbriggs
Around Bishopbriggs, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a permeable block drive cost in Bishopbriggs?
Guide price in Bishopbriggs: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Grit laying course and permeable blocks with grit-filled joints
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
- Geotextile layer where the design needs one
What the survey covers
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Existing manhole and inspection covers, and whether to recess them
Do you need permission in Bishopbriggs?
Bishopbriggs is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Permeable paving in Bishopbriggs: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Bishopbriggs?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Bishopbriggs?
Our guide for Bishopbriggs is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Do I need planning permission for a permeable block drive in Bishopbriggs?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Permeable paving near Bishopbriggs
Nearby towns we cover for permeable paving, and permeable paving across Glasgow and Dunbartonshire:
- Permeable paving in Kirkintilloch
- Permeable paving in Bearsden
- Permeable paving in Milngavie
- Permeable paving in Rutherglen
- Permeable paving in Clydebank
- Permeable paving in Dumbarton
