Planning a permeable block drive in Pembroke Dock
Pembroke Dock is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a permeable block drive cost in Pembroke Dock?
For Pembroke Dock, our guide is £100–£160 per m² including VAT, so a 50 m² drive is likely to be £4,900–£7,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £100–£160 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
What we check on a Pembroke Dock survey
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Whether front-garden planning rules apply
- Where an electric vehicle charger cable might run
Planning and kerb rules in Pembroke Dock
Pembroke Dock is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Permeable paving in Pembroke Dock: questions
Do you cover Milford Haven and Haverfordwest?
Yes. We cover Pembroke Dock and the places around it, including Milford Haven and Haverfordwest, and the rest of Dyfed.
Is the survey in Pembroke Dock free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a permeable block drive cost in Pembroke Dock?
Our guide for Pembroke Dock is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.
Permeable paving near Pembroke Dock
Nearby towns we cover for permeable paving, and permeable paving across Dyfed:
