Planning a block paving sealing job in Pembroke Dock
Pembroke Dock is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paving sealing job cost in Pembroke Dock?
Guide price in Pembroke Dock: £4.50–£14 per m² including VAT, which puts a 50 m² drive at about £235–£700. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Second coat where the product requires it
What we look at first in Pembroke Dock
- How much joint sand is left
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Type of block and its age
- Moss, algae, weeds and oil staining
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Pembroke Dock: questions
Do you cover Milford Haven and Haverfordwest?
Yes. We cover Pembroke Dock and the places around it, including Milford Haven and Haverfordwest, and the rest of Dyfed.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Pembroke Dock be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Pembroke Dock?
Guide price for Pembroke Dock: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Sealing near Pembroke Dock
Nearby towns we cover for sealing, and sealing across Dyfed:
