Permeable block paving in Portstewart: the local picture
In and around Portstewart, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.
How much does a permeable block drive cost in Portstewart?
Guide price in Portstewart: £100–£160 per m² including VAT, which puts a 50 m² drive at about £5,000–£8,100. These are Northern Ireland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £100–£160 per m² |
| Breaking out an old surface | £9.50–£40 per m² |
| Edging or kerb, bedded and haunched | £19–£50 per metre |
| Typical channel drain run | £330–£950 |
| Dropped kerb (vehicle crossover) construction | £950–£2,850 |
Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Edge restraints and any overflow or outlet the design needs
- Geotextile layer where the design needs one
- Grit laying course and permeable blocks with grit-filled joints
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Block range, thickness, colour and pattern to suit the house
- Steps, thresholds and door heights
- Trees and roots near the drive
- The kerb: is it already dropped, and is it wide enough?
Do you need permission in Portstewart?
Portstewart is in Northern Ireland, so these rules apply:
In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.
Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.
Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Permeable paving in Portstewart: questions
Is the survey in Portstewart free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do you cover Portrush, Coleraine and Limavady?
Yes. We cover Portstewart and the places around it, including Portrush, Coleraine and Limavady, and the rest of County Londonderry.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Portstewart?
Our guide for Portstewart is £100–£160 per m² including VAT, so a 50 m² drive is usually about £5,000–£8,100. Your fixed price follows the survey.
Permeable paving near Portstewart
Nearby towns we cover for permeable paving, and permeable paving across County Londonderry:
- Permeable paving in Portrush
- Permeable paving in Coleraine
- Permeable paving in Limavady
- Permeable paving in Ballymoney
