County Londonderry · Cleaning

Block paving cleaning in Portstewart

We quote block paving cleaning and care across Portstewart and County Londonderry, working from photos or a quick visit to give you a fixed price.

  • Postcodes BT55
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Portstewart: the local picture

Around Portstewart, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a block paving cleaning job cost in Portstewart?

Guide price in Portstewart£2.50–£5 per m²Including VAT at 20%

Guide price in Portstewart: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £120–£240. These are Northern Ireland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Rotary surface clean at a pressure that will not blow out the joints

Before we price your block paving cleaning job

  • Which sealer finish suits a slope or patio
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Portstewart: questions

How much does a block paving cleaning job cost in Portstewart?

Guide price for Portstewart: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Do you cover Portrush, Coleraine and Limavady?

Yes. We cover Portstewart and the places around it, including Portrush, Coleraine and Limavady, and the rest of County Londonderry.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Cleaning near Portstewart

Nearby towns we cover for cleaning, and cleaning across County Londonderry:

Other block paving services in Portstewart

Or see all block paving services in Portstewart.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote