County Londonderry · Cleaning

Block paving cleaning in Coleraine

Tired block paving in Coleraine rarely needs replacing. A deep clean, fresh jointing sand and, if you want it, a sealer, make most drives look years younger.

  • Postcodes BT52, BT51
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Coleraine: the local picture

In Coleraine, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paving cleaning job cost in Coleraine?

Guide price in Coleraine£2.50–£5 per m²Including VAT at 20%

For Coleraine, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £120–£240. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Rinse down of edges, steps and walls
  • Optional biocide and sealer

How we find the cause

  • Shade and drainage, which affect regrowth
  • How much joint sand is left
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Type of block and its age
  • Whether any blocks are loose or sunken first

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Cleaning in Coleraine: questions

Do you cover Portstewart, Portrush and Limavady?

Yes. We cover Coleraine and the places around it, including Portstewart, Portrush and Limavady, and the rest of County Londonderry.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Coleraine be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving cleaning job cost in Coleraine?

Guide price for Coleraine: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Cleaning near Coleraine

Nearby towns we cover for cleaning, and cleaning across County Londonderry:

Other block paving services in Coleraine

Or see all block paving services in Coleraine.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote