Clwyd · Permeable paving

Permeable block paving in Flint

From CH6, CH8 to the villages around Flint, we quote permeable block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes CH6, CH8
  • £100–£160 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Flint: the local picture

Homes in Flint include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a permeable block drive cost in Flint?

Guide price in Flint£100–£160 per m²Including VAT at 20%

For Flint, our guide is £100–£160 per m² including VAT, so a 50 m² drive is likely to be £4,900–£7,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Permeable block paving driveway£100–£160 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Geotextile layer where the design needs one
  • Deeper dig-out for the open-graded sub-base
  • Grit laying course and permeable blocks with grit-filled joints
  • Ground check: how well the soil drains and how high the water table sits
  • Open-graded crushed stone (no fines) laid and compacted in layers

Before we price your permeable block drive

  • Edges against lawns, beds, walls and neighbours
  • Existing manhole and inspection covers, and whether to recess them
  • Trees and roots near the drive
  • Whether front-garden planning rules apply
  • Access for a mini-digger, skip or grab lorry

Planning and kerb rules in Flint

Flint is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Permeable paving in Flint: questions

Is the survey in Flint free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Deeside, Mold and Buckley?

Yes. We cover Flint and the places around it, including Deeside, Mold and Buckley, and the rest of Clwyd.

How much does a permeable block drive cost in Flint?

Our guide for Flint is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.

Can you match the blocks to my house in Flint?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Flint

Nearby towns we cover for permeable paving, and permeable paving across Clwyd:

Other block paving services in Flint

Or see all block paving services in Flint.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Flint.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote