How much does a permeable block drive cost in Clwyd?
Expect permeable block drives in Clwyd to come in at around £100–£160 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £4,900 and £7,900.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £100–£160 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026.
Towns we cover in Clwyd
Choose a town for local prices and details for permeable paving:
- Wrexham
- Buckley
- Deeside
- Colwyn Bay
- Flint
- Rhyl
- Hawarden
- Rhosllannerchrugog
- Prestatyn
- Llandudno
- Abergele
- Mold
- Deganwy
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
- Deeper dig-out for the open-graded sub-base
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
What the survey covers
- Edges against lawns, beds, walls and neighbours
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
- Whether front-garden planning rules apply
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Clwyd
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Permeable paving in Clwyd: questions
Do you cover Wrexham, Buckley and Deeside?
Yes. We cover all of Clwyd, including Wrexham, Buckley and Deeside.
Can you match the blocks to my house in Clwyd?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Clwyd?
Our guide for Clwyd is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
