Lift and re-lay block paving in Belper: what to expect
Around Belper, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a lift and re-lay job cost in Belper?
For Belper, our guide is £35–£80 per m² including VAT, so 30 m² re-laid is likely to be £1,050–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Sub-base repaired or rebuilt where needed
- New screeded laying course
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Jointing sand and compaction
- Blocks relaid, new cuts made, edges re-set
What we look at first in Belper
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
- Trees, roots and past trenches
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Lift and re-lay in Belper: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Belper without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a lift and re-lay job cost in Belper?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Lift and re-lay near Belper
Nearby towns we cover for lift and re-lay, and lift and re-lay across Derbyshire:
- Lift and re-lay in Ripley
- Lift and re-lay in Heanor
- Lift and re-lay in Alfreton
- Lift and re-lay in Derby
- Lift and re-lay in Ilkeston
- Lift and re-lay in Long Eaton
