How much does a lift and re-lay job cost in Derbyshire?
Guide price in Derbyshire: £35–£80 per m² including VAT, which puts 30 m² re-laid at about £1,050–£2,400. These are East Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the East Midlands, checked 9 November 2026.
Towns we cover in Derbyshire
Choose a town for local prices and details for lift and re-lay:
What does a lift and re-lay job involve?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.
- Sub-base repaired or rebuilt where needed
- Lifting, cleaning and stacking
- Blocks relaid, new cuts made, edges re-set
- Jointing sand and compaction
- Survey of the blocks: thickness, damage and whether they are worth re-using
How we find the cause
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- Condition and thickness of your existing blocks
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Lift and re-lay in Derbyshire: questions
How much does a lift and re-lay job cost in Derbyshire?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Derbyshire without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
