What to know before a block paved driveway in Belper
In and around Belper, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a block paved driveway cost in Belper?
Most block paved driveway quotes in the East Midlands fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Crushed-stone sub-base laid in layers and compacted
- Cuts at edges, around covers and against the house
- Edge restraints or kerbs bedded and haunched in concrete
- Survey, measurements and a written, itemised quote
- Sharp-sand laying course screeded to falls
What we check on a Belper survey
- Whether front-garden planning rules apply
- The kerb: is it already dropped, and is it wide enough?
- Access for a mini-digger, skip or grab lorry
- Ground conditions under the old surface and how deep the sub-base must be
- Block range, thickness, colour and pattern to suit the house
Do you need permission in Belper?
Belper is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Block paved driveways in Belper: questions
Is the survey in Belper free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a block paved driveway cost in Belper?
Our guide for Belper is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Can you match the blocks to my house in Belper?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a block paved driveway in Belper?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Block paved driveways near Belper
Nearby towns we cover for block paved driveways, and block paved driveways across Derbyshire:
- Block paved driveways in Ripley
- Block paved driveways in Heanor
- Block paved driveways in Alfreton
- Block paved driveways in Derby
- Block paved driveways in Ilkeston
- Block paved driveways in Long Eaton
