How much does a cobble-effect block drive cost in Worcestershire?
In the West Midlands, a cobble-effect block drive usually costs £100–£160 per m² including VAT. For a 50 m² drive, that is roughly £5,000–£8,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026.
Towns we cover in Worcestershire
We quote cobble-effect paving in every town across Worcestershire, including:
What does a cobble-effect block drive involve?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
- Jointing sand and compaction
- Dig-out, sub-base and edging as for any block drive
- Edge cuts blended into curves and corners
- Mixed sizes laid to a planned random or coursed pattern
- Colour and size mix chosen on the survey
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
Rules for front drives in Worcestershire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Cobble-effect paving in Worcestershire: questions
How much does a cobble-effect block drive cost in Worcestershire?
Our guide for Worcestershire is £100–£160 per m² including VAT, so a 50 m² drive is usually about £5,000–£8,000. Your fixed price follows the survey.
Do you cover Worcester, Redditch and Kidderminster?
Yes. We cover all of Worcestershire, including Worcester, Redditch and Kidderminster.
Can you match the blocks to my house in Worcestershire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a cobble-effect block drive in Worcestershire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
