How much does a cobble-effect block drive cost in Warwickshire?
Most cobble-effect block drive quotes in the West Midlands fall within £100–£160 per m² including VAT. A 50 m² drive would usually be about £5,000–£8,000, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026.
Towns we cover in Warwickshire
We quote cobble-effect paving in every town across Warwickshire, including:
What does a cobble-effect block drive involve?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
- Jointing sand and compaction
- Colour and size mix chosen on the survey
- Dig-out, sub-base and edging as for any block drive
- Edge cuts blended into curves and corners
- Mixed sizes laid to a planned random or coursed pattern
What the survey covers
- Whether front-garden planning rules apply
- Where rain will go: falls, lawn, border, channel or soakaway
- Where an electric vehicle charger cable might run
- The kerb: is it already dropped, and is it wide enough?
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Warwickshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Cobble-effect paving in Warwickshire: questions
Do I need planning permission for a cobble-effect block drive in Warwickshire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Nuneaton, Rugby and Leamington Spa?
Yes. We cover all of Warwickshire, including Nuneaton, Rugby and Leamington Spa.
Can you match the blocks to my house in Warwickshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
